Skip to product information
Sold out

    6mm BB Grade Laser Plywood - Hoop Pine

    $110.20 AUD
     per 
    Shipping calculated at checkout.

    Full sheets can't be shipped. Choose one of the other cut options to enable a freight estimate to be generated.

    If in a regional location, try to consider a cutsize of 900x600 or lower as this will enable Aust Post rates to be generated.

    Stock Location: Pakenham Victoria

    Prices shown Exclude GST. Taxes will be added during checkout.

    Plywood Thickness
    Cut Option

    Product description

    This is a high quality laser plywood made in Australia from Hoop Pine (Araucaria Cunninghamii) a native Australian species. There are 3 other plywood products in this category, each of varying thickness and grading.  

    This product has the following attributes
    Thickness:
     6mm
    Face Grade: BB – Has an B grade face and B Grade back.
    Please note roughly 3% of the sheet surface may be unusable due to manufacturing grading stamps on one side of the sheet. 
    Glue Type: Made with an interior grade glue (C-Bond MUF)
    Sheet Size: The full sheet size we stock is 1200x2400mm and we can provide this cut down to 600x1200mm, 600x600mm or 600x400mm

    Q.  Is this easy to laser cut?
    A.  Yes, this laser plywood uses an interior grade glue and cuts beautifully to give a golden brown edge. Always follow instructions provided by your laser cutter manufacturer and always run adequate air extraction when laser cutting any materials. Wait and allow the laser cutter to fully evacuate all fumes before opening the machine.

         

    Q. How are the sheets graded?
    A. The manufacturer grades all sheets and this will be stamped or printed on the back of the sheet. This will mean that some portion of your plywood sheet will have a grading stamp on the surface. In most cases these can be sanded off. We have added several product images to best show the type of variation seen within this grade of plywood. Though very uncommon, A, B and C grades of plywood may still contain minor filler and imperfection.

    Q. Do you sell 3mm Laser Ply?
    A. We stock a radiata ply in 3mm which is a product you can also purchase at Bunnings. It’s a discount plywood and cuts alright, but not golden brown like the hoop pine laser ply. We do have a 3mm hoop pine laser plywood also, but because it’s more expensive vs the 4mm hoop pine (more labour intensive to manufacture), we decided not to range it as a core line and instead opted for 4mm and 6mm. 

    Q. Are the sheets flat?
    A. Our stock is kept under what we call “sandwich pallets”, which we built to produce a smooth flat and even pressure to store our plywood and MDF. This stock is kept out of direct sunlight and dry within our factory.  Plywood sheets may have some stresses in them which can present as minor twists or waves in the sheet. This is something we can not control, as it can be present direct from the manufacturer. By choosing a smaller sheet size (eg 600x400mm), more of the stresses can be released during the cutting process, resulting in a flatter sheet.

    Q. How do you package the plywood
    A. Our stock is carefully cut and packaged. We use heavy duty custom boxes to send the majority of our products including plywood.  Below is 600x400mm and 600x600mm orders being packed.

         

    Additional Information:

    • Produced in Australia and meets AS/NZS 2270:2006 standards
    • Manufactured to meet E0 formaldehyde levels (Less than or equal to 0.5 mg/l)
    • The manufacturer grades all sheets and these markings may be present either on printed text or ink stamps on the back of the sheet. Although very uncommon, A, B and C grades of plywood may still contain minor filler and imperfection.
    • As this is a natural timber product,  each sheet will be unique in terms of grain pattern and the presence of darker sections from inner layers of the plywood.
    • It is recommended to store your plywood sheet with a weight on top of the entire sheet and to store in a dry area out of direct sunlight or varying temperatures.
    • Sheet measurements may have a variance of +/- 5mm as we do us a vertical panel saw to cutdown plywood

    Important Information

    Please note:

    - Whenever cutting this material make sure you are using proper fume extraction with adequate airflow.

    - We set a high quality threshold for what is packed, however occasionally some very minor imperfections may be present within a sheet or its protective film. 
    - Although we have invested heavily in super flat highly supportive racking to best store our acrylic, some sheets may have some minor curve to them from transit or manufacturing.
    - We do our best to accurately represent colours. Website colours can also appear slightly different depending on your screen type or device used.

    - Acrylic thickness can vary slightly from the advertised 3mm. +/- 10% is the common level of tolerance.

    - Acrylic protective films can deteriorate overtime. It is recommended not store them in direct sunlight when the protective layer is still on.

    View full details

    6mm BB Grade Laser Plywood - Hoop Pine

    Wholesale Pricing

    Consistent Value

    We keep our prices competitive everyday. This means you get the best deal with no need to wait for promotions.

    Acrylic Specialist

    We store, handle and process acrylics in a professional way

    Full Sheets Cut To Size

    With several lasers on site, we're ready to cut your order

    Smaller individual sheets can be purchased also. Please contact us for more details.